Advantage of high-speed presses at high speed when the stator and rotor punching Commentary
Demand is very large rotor, the rotor is currently doing so are basically high-speed stamping presses.
Since each rotor is continuously wound with a strip made of a strong plastic and after high-speed presses, so that the material itself or artificial differences and avoid a gap occurs between the film and the film can be avoided, so that the size precision, surface treatment and performance are better than the traditional punch punching style rotor.
Furthermore, since the high-speed presses initial processing of raw materials and the volume of each tooth staggered arrangement, and therefore there is a lot of wastage of raw materials, material utilization can be increased by 70%.

Further, since the positioning device by making high-speed punch molding loose rotor starting end and off-side position in the same line, it is possible to ensure the flatness of the rotor on the plastic, the lower end face.
Ultimately, the use of high-speed presses Double material frame, you can enjoy a discharge side of the open-book, which cooperate with the punch peripherals leveling machine, feeder and other gear can be synchronized using stamping feeding purposes, thus greatly improving the work efficiency ,reduce manufacturing cost.
When watching video over high-speed presses Presses rotor time, you will be able to experience high-speed stamping advantage.