C-type high-speed punch size specifications how to confirm?
In the choice of C-type high-speed presses, should first determine the size specifications, if the selected C-type high-speed presses specifications too large or too small will affect the process, so that the user selects the beginning, you should determine a good C-type high-speed presses size specifications, C-type high-speed presses specifications determine should be determined by the Department of stamping equipment pressers dimensions size of the mold, punching speed and punch pressure. Specific also consider the following points:

1, C-type high-speed presses selected nominal pressure must be greater than the total pressing force pressing need.
2, C-type high-speed presses itinerary should be appropriate: a direct impact on the height of the mold stroke, stroke too large, the punch and the guide plate separating guide plate mold guide pin guide sleeve or separation.
3, C-type high-speed punch shut height should be the height of the closed die adapt, that is between the maximum and minimum height closed closed closed height between the height of the die.
4, C-type high-speed presses work surface must be greater than the size of the mold lower die dimensions, and leave room for mounting, but the table should not be too large, in order to avoid discontinuity good table.

If you type C specifications for high-speed presses to determine if the size is not good, you can also call us SAMHOOR punch, we will be the first time for you to solve the problem.