——“Samhoor nicety machine”it began in 2000 year,focus on Precision punching, high-speed presses production stamping equipment R & D .
Dedicated, professional, quality !
High-speed presses oil spill causes and treatment
Because long-term high-speed high-pressure high-speed punch operation, oil leakage will inevitably occur when there is leakage failure, timely discovery maintenance, can effectively protect the life and safety of the equipment in operation.
1. Seal defective
Solution: Replace the seals
2. Cover the inside of the tubing link high-speed presses loose
Processing Method: Cover the inside of the tubing lock rod.
3. The high-speed presses gear oil tank overfilled
Approach: The gear exclude excess oil tank, causing oil median stop.
4. overload cylinder liner damage
Treatment: removal of the replacement lining.
5. Punch seals aging, damage
Treatment: removal of the replacement oil seal.
6. High-speed punch overload pressure switch detecting oil spills
Treatment: pressure switch update.
7. The high-speed presses clutch exhaust pipe injector
Solution: Check whether the oil supply to the oil excess.
8. Punch slider guide passage injector
Solution: Check the punch slider guide path is too much fuel cycle. It is appropriate to adjust the volume. No, check the baffle plate is indeed locked.
9. Seal punch of poor quality due to oil spill
10. The oil spill caused by improper operation of the punch. Punch operator caused by improper use, overloading or tipping angle is too large, sometimes strained hydraulic working face, squeeze caused by bad seal leakage.