——“Samhoor nicety machine”it began in 2000 year，focus on Precision punching, high-speed presses production stamping equipment R & D .
Dedicated, professional, quality !
High-speed presses leak how to do? Quickly to Jojo!
High-speed punch press is to ensure the normal operation of the gas and the use of the brake clutch is to ensure stamping safe, efficient and stable core. So if we encounter high-speed presses leak, then how should we do it? We hasten to Jojo maintenance staff of professional experience in high-speed punch it!
1. High-speed punch balancer (liner, pressure regulators) fault
Solution: Check the balancer cylinder above and below whether there is leakage scenarios. If so, replace the balancer lining.
2. High-speed pneumatic punch line problem (tracheal rupture release, quick connectors)
Solution: Check whether there is high-speed presses pipe joints aging damage. Yes, replace the connector.
3. Punch die pad problem
Solution: Check whether the airbag rupture leak.
4.OVER LOAD fault
Treatment: Removing the check the internal lining is damaged. Yes, update lining.
5. The high-speed presses filter leak
Solution: Check the oil filter cup is broken.
6. The high-speed presses solenoid valve (internal spacer) fault
Solution: Check whether the high-speed presses solenoid valve being stuck foreign matter.