SAMHOOR high-speed punch 2020 man-machine interface and in-mold riveting technology function introduction

The SAMHOOR high-speed punching press man-machine interface SAH-Z180 punching controller integrates all the motion control related buttons on the traditional punching machine body into the man-machine interface touch-sensitive punching controller.
It has the function of motor-to-stator chute control, motor rotor center hole stage control, rotor and stator lamination thickness control, and when a fault occurs, it imports a dialogue type abnormal code troubleshooting message, providing users with a simple, convenient and easy-to-use Operation interface to achieve more efficient production requirements.

SAMHOOR high-speed punch in-mold riveting technology-hydraulic top cylinder system effectively improves the traditional stamping process due to the shrinking ring used in the core mold, so that the rotor and stator stacks will be too loose or too tight, resulting in slack or deformation, The appearance is strained, resulting in uneven riveting pressure and iron chip deformation, resulting in uneven stacking thickness and poor dynamic balance; the equipment is mainly composed of supporting equipment for top cylinders, high-speed punching dies, and SAH-M3C high-speed stamping control System Components. The system is a fully automatic product from stamping, chute control, metering to stacking riveting and pressing. Through this method, the stator and rotor only need to be punched and pressed, without relying on the function of the mold shrink ring , To meet the requirements of the verticality and concentricity of the laminated, stacked and compacted stator and stator products, without the need to go through the traditional riveting press process, to achieve more efficient production efficiency, and greatly improve product quality.