High-speed presses clutch Installation Considerations
   High-speed presses clutch mounted between the flywheel with the crankshaft drive, two-button device with a foot control, the drive flywheel and crankshaft gear clutch to achieve its main structure includes a clutch, clutch ramp key, clutch lever, gland, friction plates the clutch and the clutch lever key oblique shafts respectively mounted on the shaft hole of the clutch body and the gland, the clutch oblique key hook-like projections and the short arm of the clutch lever position relative, bending the column walls clutch body spring wells equipped with a compression spring, the spring clutch oblique key role in the drive into the top of the flywheel keyway corresponding wedge drive engagement is achieved.
High-speed presses clutch Installation Considerations
1, there is no moisture in the use of dry magnetic clutch oil classification under the state, if the friction parts stained with water or oil substance classification, will be greatly reduced friction torque, high-speed presses clutch sensitivity will deteriorate, in order to avoid the use of these situations, please add the cover provided.
2, in the dust a lot of places to use, use the protective cover.
3, used to install the long axis of the clutch size specified specifications.
4, taking into account factors such as thermal expansion, the mounting shaft thrust Please select 0.2MM or less.
5, please attraction gap in the mechanical installation will be adjusted to within plus or minus 20% of the specified values.
6, the carriage please keep the light, do not use the high-speed presses clutch bearings under heavy pressure.
7, on the assembly with screws, use the spring metal sheet, then agent conducted to prevent the relaxation process.
8, the use of the machine side of the frame to maintain the lead, we must also use the terminal board and so does the connection.