——“Samhoor nicety machine”it began in 2000 year,focus on Precision punching, high-speed presses production stamping equipment R & D .
Dedicated, professional, quality !
When the high-speed presses encounter mold stuck, how to solve?
In the course of the actual use of high-speed presses, the use of improper operation often cause mold stuck on the mold will not quickly improved, the need to repair the mold shut down for the card, resulting in a greatly shortened the punching effective working time, resulting in the production can not keep up Progress demand. At present, many manufacturers of high-speed presses, although expect some solutions, such as high-speed punch die Submodules install anti-jamming adjusting device by between sub-module screw fixing blocks with screw mounting plane bearing, can greatly reduce the screw fixing blocks relative friction between the screw and avoid mold stuck phenomenon, but in the high-speed punch, but there is no specific anti-jamming device applications, mold appears stuck sometimes can not be quickly resolved, that the use of high-speed presses to bring a great deal of inconvenient.
On the design and manufacture of high-speed presses produce increased with card module detecting the reverse electronic control system to be addressed. Equipped with an electronic control system SAMHOOR reverse speed presses, die detecting when the card is detected when the punch die stuck, card mode detecting device sends a signal to the PLC program controller, PLC program controller controls the main motor reversing switch is closed , when the main motor reverse, reverse action under installed on high-speed presses slider in the main motor of the upper die is lifted, so that effective and rapid solution to the high-speed presses appear in the actual process of using a mold stuck phenomenon.