——“Samhoor nicety machine”it began in 2000 year,focus on Precision punching, high-speed presses production stamping equipment R & D .
Dedicated, professional, quality !
High-speed presses shock horn should be placed on how?
Horn should generally be placed on both sides close to the anchor bolt, said the standard pad method. According to the size of the equipment base, construct different types and bolt spacing, as well as different pad method. For example: when the device is small i bolt spacing closer to the base, can be placed between the two anchor bolts only a horn cross pad method; when the bolt spacing distance, in addition to using the standard pad extrajudicial , the need to adopt a set of horns in the middle increase auxiliary pad method; for large equipment base according to the shape and size of anchor bolt spacing, including the use of standard pad method, cross pad method and auxiliary pad method of mixing pad method. The number of blocks in each group horn horns the better, usually not more than 5, a height of 50 ~ 100mm, smooth place to contact to be good. Equipment leveling, alignment after each group must be pressed horn, horn and asked each firm should be spot-welded to each other; the horns should be exposed at the outer edge of the base device 10 ~ 50cm.