Elaborate on the advantages of high-speed presses shock horn and credit
First to understand the advantages of high-speed presses shock horn:
Shock horn is indispensable to a punch installation accessories.
According to traditional installation methods, the general reserve to be dug hole, put punch, string into the anchor bolts, pouring cement, cement until the maintenance period (take 2 to 3 weeks) after full adjustment level, tighten the anchor bolts nuts. This is bound to result in long installation period, high construction costs. High-speed punch presses mattress without setting foot in the anchor bolts installed with the ground fixed, good damping and considerable vertical deflection, so punch stabilize the ground.

High-speed presses shock horn of the credit is to save installation costs and shorten the installation cycle. We upgraded the traditional installation methods, do not dig the foundation, easy to install, easy to adjust, cost savings, and have isolated the effect of vibration absorber. The pads screw a string when using the pressure foot hole punch by punch adjusted after installation of the screw 1 level, then tighten the nut can be put into production. At the same time effective damping rubber vibration attenuation of the machine itself, to reduce vibration forces rumored to prevent vibration of the incoming power to ensure dimensional accuracy and quality control of the building structure resonance vibration transmission power and noise. Good damping and considerable vertical deflection, so punch stable on the ground, saving installation costs and shorten the installation cycle. It can also at any time according to the production punch exchange position, eliminating the second installation costs, so that high-speed presses easy installation possible. It all will count on high-speed presses credit shock mounts.