High-speed presses work site selection

(1) Avoid direct sunlight and other heat radiation, avoid too moist or too much dust in the workplace, to make use of the air-conditioned environment, kept at room temperature about 20 ℃. Because our country is in a temperate climate, affected by the monsoon, temperature differences, and for high precision, expensive CNC machine tools, it should be placed in an air-conditioned room use.

(2) there are places to avoid corrosive gases. Because the etching gas is easy to make electronic components deteriorate, or cause poor contact, or cause a short circuit element, affecting the normal operation of the machine.

(3) to stay away from large vibration devices (such as presses, forging equipment, etc.). For high-precision machine tools should adopt anti-vibration measures (such as anti-vibration ditch, etc.).

(4) to stay away from strong sources of electromagnetic interference, so that the machine is stable.